Configure Your
Mounting Table

Configuration

• - 1

  AMTE-400

  +
  Developed by panel builders, for panel builders - the AMTE-400 is an effective safety and time-saving solution for the assembly, wiring, and testing of industrial electronics.

  • Ergonomic workstation for the assembly and wiring of industrial electronics. Dual-action tilt/height-adjustable version – significantly increased ergonomics vs single actuator system
  • Infinitely adjustable tilt control from 0 - 70°
  • Infinitely adjustable height control from 31-⅞" to 45-⅞" (81 - 116.5 cm)
  • Max load capacity: 400 kg; 908 lbs
  • Maximum surface area (standard supply): 44 x 78" (1117 x 1980 mm). Upgradeable to 80.5 x 84" (2044 x 2100 mm) for larger items (using the 31013-001 Side Extensions and 31013-128 XL Upper Extension)
  • Floor space requirement: approximately 63 x 45" (160 x 110 cm)

  
  Scope of supply:

  • AMTE-400 Mounting Table
  • 4 x Clamping Units for Backplanes (31013-127)
  • 2 x Standard Casters
  • 2 x Locking Casters
  • 120v AC Power Adapter

  
  Links:

  • 31014.US
  • Manual
• - 0

  Side Extensions

  +
  • Table Side extensions increase the horizontal surface area from 44" (1117 mm) wide, to a working range of 65.5 - 80.5" wide (1663 - 2044 mm)
  • Recommended for use as a pair
  • Recommended for large panel work (horizontal assembly)

  
  Part numbers:

  • 31013-001
• - 0

  Panel Stops

  +
  • Panel Stops create a felt surfaced ledge for large enclosures and backplane assembly
  • Recommended for use as a pair
  • Ratchet straps are required for use while the table is tilted
  • Highly recommended for large enclosure work

  
  Part numbers:

  • 31013-007
• - 0

  Wire Guide

  +
  • Modifiable plastic guide for supporting and organizing wires.
    Pre-drilled for wire sizes 20 ga - 10 ga
  • Recommended for use with Wire Roll Supports (31013-016)

  
  Part numbers:

  • 31003-015
• - 0

  Wire Roll Support

  +
  • Structural support for commercial wire rolls - can fit multiple rolls per support, and up to 6 supports per table depending on wire roll sizing
  • Eliminates the need for an additional wire cart
  • Recommended for use with Wire Guide (31003-015) for a more organized panel building process

  
  Part numbers:

  • 31003-016
• - 0

  Roller Conveyor

  +
  • Assisted support for sliding backplanes from the table-top and preparing for insertion into the cabinet/enclosure
  • Please always take caution when installing a backplane in an enclosure. We recommend installing components after backplane installation whenever possible

  
  Part numbers:

  • 31013-009
• - 0

  Extra Clamping Units

  +
  • Rigid, easy-to-use clamping system for securing backplanes to the surface of the table
  • Standard delivery includes 2x 31013-127-L and 2x 31013-127-R

  
  Part numbers:

  • 31013-127-L
  • 31013-127-R
• - 0

  Optional Battery

  +
  • Lithium-ion battery to replace AC power supply
  • Increases table mobility

  
  Part numbers:

  • 31013-002
• - 0

  Mounting Plate

  +
  • Replaces clamping units on lower table extension to create a ledge for backplane assembly
  • Recommended to be paired with suspension straps (31013-011) for vertical work

  
  Part numbers:

  • 31013-019
• - 0

  Suspension Straps

  +
  • Recommended for all AMTE table operations
  • Required for use with Panel Stops (31013-007) and Mounting Plate (31013-019)

  
  Part numbers:

  • 31013-011
• - 0

  Tool Holder

  +
  • Easily supports electrical working tools
  • Slots for pliers, strippers, screwdrivers, and more
  • Custom options available on-request

  
  Part numbers:

  • 31003-014